Brake Repair Chevrolet Blazer

Brake Repair Chevrolet Blazer $128 Pads and Labor

Stacks Image 4
Chevrolet Blazer BRAKE REPAIR
Chevrolet Blazer braking systems can be simple but performing Blazer brake repair, pad selection is crucial. Chevrolet's braking systems can often make noise after being serviced, even at the dealership. Their OEM brake pads can be noisy and produce quite a bit of brake dust. At Detroit Brake Repair, we use -can use premium ceramic or semi-metallic brake pads to ensure Blazer brakes provide maximum stopping power with little or noise. Furthermore, our installation of pads is warrantied for 24 months or 24K miles, whichever comes first – a warranty that the Chevrolet dealership can’t touch. Chevrolet braking systems are basic for the most part, but a skilled Detroit Brake Repair b technician to find potential problems. For continued safety and smooth driving regular inspections and superior Chevy Blazer brake repairs and services are Important.

GET A FREE QUOTE
Get Service Today!


32694 Van Dyke Warren

Brake Pad Replacement for One Axle (Front or Back)Chevrolet Blazer

Traditional Repair Shop $300-$350

Dealership $350-$450
 Detroit Brake Repair $128

Complete Chevrolet Blazer Rotor and Brake Pad Replacement w/Brake Sensor

Traditional Repair Shop $1220-$1420

Dealership $1480-$1870
 Detroit Brake Repair $260-$400

Chevrolet Blazer Rear Brake Pad and Rotor with Brake Sensor Replacement Cost Average

Traditional Repair Shop $600-$700

Dealership $730-$920
 Detroit Brake Repair $-260-$360

Chevrolet Blazer Brake Fluid Change Cost Average

Traditional Repair Shop $150-$175

Dealership $160-$200
 Brake Tech $125

Stacks Image 47
  • •
      Wear indicator on vehicle dashboard . 
    When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary on your Chevrolet Blazer. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
    • High pitched squeal when braking. 
    When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. Chevrolet Blazer squealing or squeaking noise is designed to make you aware that the brake pads are getting low and must be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point, and the vehicle is unsafe to drive until corrected. .
    • Brake pedal pulsation or vehicle vibration.
     Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies, on the Blazer.
    • Vehicle pulling or wandering on braking. 
    If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed. .
    • High mileage on existing pads.
     Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the Chevrolet Blazer braking system. .
    • Brake system warning lights and/or maintenance reminder messages. 
    Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible. .
    .
    How do mechanics replace brake pads on Chevrolet Blazer?
.

Normally, pad replacement requires these steps: .

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required. 
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system. .
    .
    Is it safe to drive with a brake pad problem with your Chevrolet Blazer? .

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on. .

If you detect unusual noises on the Chevrolet Blazer, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem. .

    When replacing brake pads keep in mind: .


Chevrolet Blazer Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.
 


426
​